The VOOPOO DRAG MAX Kit is the latest addition to VOOPOO’s Drag line up. The DRAG MAX features the brand new GENE Fan 2.0 Chipset, powered by (2) High-Amp 18650 batteries, and can be used in an MTL or DTL fashion. Featuring the newest generation of GENE Fan 2.0 Chipsets, the Voopoo DRAG MAX Pod Mod can attain wattages between 5-177W and is equipped with plenty of protections and safeties to ensure a pleasurable and safe vaping experience. However, the beauty of the DRAG MAX Kit lies further deeper than the visually striking zinc-alloy frame and decorative leather/carbon fiber panels, instead lying in the versatility of the DRAG MAX Pod Kit. Supporting DTL and MTL vaping, the DRAG MAX can change airflow by rotating the pod 180º and reinstalling it with the sturdy magnetic connection. In addition, the DRAG MAX can be outfitted with a myriad of coils from the Voopoo PnP Coil Series with the intelligent Gene 2.0 Chipset autodetecting and adjusting the wattage accordingly to prevent burnt coils.
- As always, remember to prime new coils. Place a few drops of vape juice in the coil, install the coil and wait five minutes before using. This ensures the coil is saturated and avoids getting dry hits or burning your coil.
- Replacement Coils available here
- Replacement Pod available here
- The Dual (2) external 18650 batteries needed to power this device are not included in the kit.
Batteries available here
- External Charger available here
- GENE.FAN 2.0 Chipset
- Dimensions – 122mm by 50.25mm by 25mm
- Powered by (2) High-Amp 18650 Batteries
- Wattage Output Range: 5-177W
- Voltage Output Range: 6.4-8.4V
- Resistance Range: 0.1-3.0ohm
- SMART Mode
- BYPASS Mode
- Firing Speed – 0.001s
- Zinc-Alloy Chassis Construction
- Intuitive Firing Button
- 1.08″ TFT Color Display
- Two Adjustment Buttons
- 4.5mL Capacity
- Bottom Fill System – Press To Fill
- VOOPOO PnP Coil Series
- 0.2ohm PnP-VM5 Coil
- 0.15ohm PnP-VM6 Coil
- Press Fit Coil Installation
- Magnetic Pod Connection
- Overtime Protection
- Short-Circuit Protection
- Overcharge Protection
- Output Over Current Protection
- Over-discharge Protection
- Over-temperature Protection
- Battery Reversal Protection
- Type-C Charging Port
1 x DRAG MAX Device
1 x 4.5mL PNP Pod Tank
1 x 0.2Ω PNP-VM5 Coil
1 x 0.15Ω PNP-VM6 Coil
1 x USB Type-C Cable
1 x User Manual
We do not recommend using the built-in USB charging feature on mods that use replaceable lithium-ion cells.
Lithium-ion batteries must be balance charged using a proper external charger to avoid damaging the cells and to reduce the risk of venting.
Micro and mini-USB ports are notoriously fragile, and as such, we do not offer a warranty or repair service on any USB charging ports if you choose to ignore this warning.