Geekvape | Aegis Eteno E100 Pod Mod Kit
Color
Geekvape | Aegis Eteno E100 Pod Mod Kit
Black
Itsvaping - Tuggerah
168 Pacific Highway
Shop 4
Tuggerah NSW 2259
Australia
Aegis E100 Eteno Pod Mod Kit by GeekVape is equipped with a leak-proof pod with top ventilation, and it has an IP68 durability rating. Powered by AS-Chip 3.0, it provides excellent performance. Try Eteno and experience eternal amusement!
This leakproof pod enhances the vaping experience with an innovative top-to-bottom airflow design and a premium Geekvape P Coil that has a longer lifespan.
The second generation of Geekvape's Tri-Proof Technology makes the Aegis Eteno E100 more compact. Together, IP68-rated water and dust resistance and a higher level of shock resistance give enhanced protection in harder conditions.
Intelligent Working Modes AS-Chip 3.0 AS chipset is a potent source of energy for performing any complicated activities. Automatically pick the optimal output for optimal flavor, and set a maximum output level restriction to prevent coils from burning out.
Geekvape Aegis E100 is powered by an external 18650 battery and provides up to 100W of consistent output. With a 510 Magnetic adapter, this highly compatible pod can be swapped from pod to tank with ease. The 510 adapter is not included with the E100 kit, but it is available for purchase separately.
Please note:
- As always, remember to prime new coils. Place a few drops of vape juice in the coil, install the coil and wait five minutes before using. This ensures the coil is saturated and avoids getting dry hits or burning your coil.
- The external 18650 battery is not included in the kit.
- External Charger available here
- Replaceable Coils available here:
- Replaceable Pod available here:
- 510 Adapter available here:
Specifications:
- Dimensions:39.56 x 33.0 x 134.5mm
- Battery: Single 18650 (not included)
- Capacity: 4.5ml
- Coils:
- P-Coil Mesh 0.2ohm: 60 - 70W
- P-Coil Mesh 0.4ohm: 50 - 60W
- Compatible with all Geekvape P-Coils
- Wattage Range: 5 - 10W
- Screen: 1.06-inch TFT Color
- Resistance Range: 0.1 - 3.0ohm
- Maximum Output Current: 35A
- Maximum Output Voltage: 7.5V
- Modes: Smart/Power/Boosting/VPC/TC-NI/TC-TI/TC-SS/TC-TCR
- Top Airflow Leakproof Design
- IP68 Water, Dust and Shock Resistance
- AS-Chip 3.0
Package Includes:
1 x Geekvape E100 Pod Mod
1 x Geekvape E100 Pod
1 x P-Coil Mesh 0.2ohm pre-installed
1 x P-Coil Mesh 0.4ohm
1 x Spare Parts Pack
1 x Coil Tool
1 x Type-C USB Cable
User Guide
PLEASE NOTE:
We do not recommend using the built-in USB charging feature on mods that use replaceable lithium-ion cells.
Lithium-ion batteries must be balance charged using a proper external charger to avoid damaging the cells and to reduce the risk of venting.
Micro and mini-USB ports are notoriously fragile, and as such, we do not offer a warranty or repair service on any USB charging ports if you choose to ignore this warning.