Digiflavor | Drop Solo RDA

*Must be familiar with coil-building. Coils not pre-installed*

Designed by the Brian from The Vapor Chronicles, the Digiflavor DROP SOLO RDA is right here for you! The DROP SOLO RDA adopts two large post holes for easy single coil installation. The huge holes also provide maximum building space with open access to trim excess away. The stepped airflow design provides precise control while maintaining an ultra smooth and whistle free experience. The 5mm deep and spacious juice well holds more e-liquid without leaking too. The DROP SOLO RDA comes with a standard 510 pin and BF pin for squonk MODs as well. You can enjoy amazing building and vaping with top level experience.

Specifications & Features:

• Size: 22mm(D) x 24mm(w/o drip tip)
• Juice Well Depth: 5mm
• Coil: Single Coil
• Thread: 510 thread
• Two large post allowing for easy single coil placement
• Stepped airflow design provides precise control
• Deep and spacious juice well
• Stainless and PMMA top cap included
• 24mm decorative beauty ring
• Standard 510 pin and BF squonk pin attached

Package Includes:

1x DROP SOLO RDA
1x BF Pin
1x PMMA 24mm Ring
1x Allen key
1x PMMA Mid Cap
1x 510 Drip Tip Adapter
1x Drip Tip
1x PMMA Top Cap
1x User Manual
1x Spare Parts 

This product is for advanced user only!

• Rebuildable atomiser: The user of this atomiser must install wick and wire (coil) in order to use it.
• This atomiser is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:

• Rebuildable atomiser coils and wicks have known risks.
• Rebuildables are for experts, not average or beginner vapers with no multi-meter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work.
• These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.